NVS Surfboard Fins - Stu Kenson Twinzer Fin Set (L) - Apex

This is a Futures Single Tab Twin Fins with FCS Single Tab Lead Fins (Canard) (They can also be used to direct water flow into larger rear fins, which can help maintain the board on the rail)

Longtime surfer/shaper Stu Kenson has cemented his place as one of San Diego's most talented and respected custom board builders over the course of the past 4-5 decades.

He started doing ding repair at the age of 13, and shaped his first board during the summer of 1971.

Stu Kenson has cultivated a dedicated, worldwide following and is know for his performance shortboards, big wave guns, longboards and various other alternative board designs (single, twin fish, twinzer and mid-length board).

Per Stu, these “pair with essentially all sizes and styles of Twinzer set ups; from performance longboards, mid-length eggs, fish boards and high performance shortboards.”

The Stu Kenson TWINS  are a high performance upright template.  Designed for his twinzer boards but can be used separately in any performance Twins and variety of other boards.
Twin
Base: 4.95"
Height: 5.46"
Area: 19.55  in²
Rake: 33.5°
Foil: Flat
Material: G10    

Canard
Base: 2.77"
Height: 3.16"
Area: 7.17 in²
Rake: 31.9°
Foil: Flat
Material: G10

Cant angle for Futures based twins: 6.5 Degree

*This set is the 9 degree canard fin cant angle for 0 degree plug

NOTE: If front canard fins use a 0-degree plug then select the 9-degree cant angle; if the plugs are 9-degree then select the 0-degree cant angle.